New Miner Training

Category	Sub-Category	Title	Made By	Phone #	Video ID	Date Rec'd	Play, min
Training	New Miner	New Miner Training	National Stone Assoc	800-342-1415	NSA1	1995	23

QUESTIONS

1. New miners must have ___ hours of training to work in surface mines and ___ hours of training to work in underground mines. MSHA also requires ___ hours of refresher training on an annual basis.

2. Additional training required for work underground includes entering and leaving and barricading. T__, F___

3. Housekeeping is not part of MSHA-required training. T__, F__

4. Lockout is not part of MSHA training. T__, F__

5. MSDS training is part of MSHA training. T__, F__

6. Steel-toed shoes are required for all jobs on a mine site. T__, F__

7. According to the video, if you must raise your voice to communicate at 20-30 feet, you should be wearing hearing protection. T__, F__^*

8. Proper lifting involves bending the back a little. T__, F__

9. Chocks are used to _________________________________.

10. A raised truck bed can be supported by a pin or fail-safe blocking T__, F__

11. Hooks used for lifting must have a _____ _____.

12. A ______ should be used to guide lifted objects.

13. The tool rest on a grinder should be no more than ____ (in inches) from the wheel.

14. Persons welding should wear synthetic clothing. T__, F__

15. Welding screens protect whose eyes? ____________________.

16. Gas cylinders must be stored (upright, laying down) and must be (capped, uncapped).

17. MSHA requires preshift inspection of all self-propelled equipment. T__, F__

18. A parking brake must be able to keep the loaded equipment from rolling under what condition? _________________________________________________.

19. When traveling with a loader, the load should be kept ___________________________.

20. When mounting or dismounting mobile equipment, use the ___ points of contact method.

21. Approved safety containers are required for small amounts of fuel and for _________.

22. In a proper lockout procedure, each employee should have his own ________.

23. Always stand ____________ and face _______ from a major power disconnect panel when opening or closing the circuit.

24. When entering a confined space, an ____________ is needed.

Category	Sub-Category	Title	Made By	Phone #	Video ID	Date Rec'd	Play, min
Training	New Miner	New Miner Training	National Stone Assoc	800-342-1415	NSA1	1995	23

ANSWERS

1. New miners must have _24_ hours of training to work in surface mines and _40_ hours of training to work in underground mines. MSHA also requires _8_ hours of refresher training on an annual basis.

2. Additional training required for work underground includes entering and leaving and barricading. T__, F___

3. Housekeeping is not part of MSHA-required training. T__, F__

4. Lockout is not part of MSHA training. T__, F__

5. MSDS training is part of MSHA training. T__, F__

6. Steel-toed shoes are required for all jobs on a mine site. T__, F__

7. According to the video, if you must raise your voice to communicate at 20-30 feet, you should be wearing hearing protection. T__, F__^*

8. Proper lifting involves bending the back a little. T__, F__

9. Chocks are used to __ keep mobile equipment from rolling ____.

10. A raised truck bed can be supported by a pin or fail-safe blocking T__, F__

11. Hooks used for lifting must have a _ hook latch _.

12. A _tag line_ should be used to guide lifted objects.

13. The tool rest on a grinder should be no more than _1/8_ (in inches) from the wheel.

14. Persons welding should wear synthetic clothing. T__, F__

15. Welding screens protect whose eyes? __ Other workers ___.

16. Gas cylinders must be stored (upright, laying down) and must be (capped, uncapped).

17. MSHA requires preshift inspection of all self-propelled equipment. T__, F__

18. A parking brake must be able to keep the loaded equipment from rolling under what condition? ___Maximum grade vehicle travels ___.

19. When traveling with a loader, the load should be kept __ as low as possible ____.

20. When mounting or dismounting mobile equipment, use the _3_ points of contact method.

21. Approved safety containers are required for small amounts of fuel and for _waste_.

22. In a proper lockout procedure, each employee should have his own _lock_.

23. Always stand __aside__ and face _away_ from a major power disconnect panel when opening or closing the circuit.

24. When entering a confined space, an _attendant__ is needed.